Planmere design guides / updated 2 November 2026

How to measure your bathroom for a design brief.

You do not need a polished drawing to start. You need a clear sketch, consistent measurements and a record of what is known and what still needs checking.

Prepare your sketch and units

Use paper, a pencil and a suitable tape measure. Draw the room from above, label the walls clockwise and mark the doorway. Use millimetres throughout. Write the date and the name of the person measuring on the page. Leave space for notes rather than crowding numbers together.

Measure each wall, then check the parts

Record each full wall length and the ceiling height. Where the shape changes, measure every return, alcove or boxed section. For a wall with a door, record the distance from the corner to the frame, the opening and the remaining section. Compare the sum of those parts with the full wall length. If they disagree, remeasure or mark the discrepancy; do not silently change a number to make it fit.

Include doors, windows and slopes

Show the door swing and frame. Record a window’s width, height, sill height and distance from a corner. Include radiators, visible beams, low ceilings and sloping areas. If the room is not square or surfaces are uneven, flag that fact for a measured survey or installer check.

Record fittings and visible services

Mark the bath, shower, basin, WC and any furniture you intend to keep. Add exact product models where known. Photograph visible water and waste connections and the soil-pipe position. Record a visible extractor and any accessible service boxing without removing it. A point drawn on the plan records a location; it does not establish whether the service can be moved.

Take a matching set of photographs

Take one wide image of each labelled wall and one from the doorway, then close-ups of awkward features. Keep the camera level. Include the labels in the file names so the designer can match each photo to the sketch. Keep people, personal documents and unrelated private details out of frame.

Leave hidden conditions to the right person

Do not open electrical covers, disconnect plumbing, remove fixtures or enter unsafe spaces to obtain measurements. Mark hidden services and uncertain construction as unknown. Your installer must assess drainage, waterproofing, ventilation, electrical requirements and the feasibility of the proposed arrangement.

Your bathroom brief checklist

These measurements support initial design work. They do not replace verification on site before ordering or installation. If measuring is difficult, arrange a measured survey and share its drawings with us.

Use the printable room measurement guide, then read about planning a small bathroom.

Discuss your room ↗