Planmere design guides / updated 2 November 2026

Kitchen layout mistakes to catch on paper.

A convincing render does not show every collision, missing filler or awkward appliance door. Check the plan against the exact products and the way you use the room before approving an order.

1. Checking the room only with doors closed

Draw the opening direction of the oven, dishwasher, fridge and nearby room doors. Ask what happens when two are open together. Can someone unload the dishwasher without blocking the sink or trapping another person? Use the manufacturer’s installation information for the actual model, including any space needed to remove drawers or shelves.

2. Treating nominal cabinet widths as the whole run

A row of cabinets also needs its agreed fillers, end panels, appliance gaps and finishing details. A 600 mm cabinet label does not establish every external dimension or clearance. Have the supplier show how the full run adds up against verified site measurements. At a wall, check whether handles and drawers can open without fouling the return.

3. Choosing an island before testing circulation

Mark the island footprint, stools and open appliance doors on a scale plan. Consider both walking routes and the working space needed when someone is cooking. A peninsula or a clear central area may work better. Do not rely on a universal aisle dimension without considering the room, the products and anyone’s access needs.

4. Leaving landing and preparation space to chance

Walk through a normal meal: taking food from the fridge, washing it, preparing it, cooking and serving. Identify where each item goes down. A narrow strip of worktop may look useful but disappear once a kettle, utensils and a chopping board are in place. List the small appliances you actually keep out.

5. Hiding the service questions

A sink or hob can move on a drawing much more easily than its plumbing, extraction or supply can move on site. Ask the appropriate installer to assess proposed changes before treating a layout as settled. Record any uncertain route as an open question rather than implying it has been approved.

6. Ordering the worktop too early

Agree the supplier’s sequence for final measurement or templating, cabinet installation and appliance information. Confirm joints, overhangs, cut-outs, support and edge details in writing. A concept drawing is not a fabrication template.

7. Comparing quotations with different contents

Check cabinet references, internal fittings, end panels, fillers, plinths, handles, appliances, worktops and delivery line by line. Keep a single revision of the schedule so one supplier is not pricing an older layout. Ask who signs off the final dimensions and order.

A useful final check

  1. Walk through one ordinary cooking and cleaning routine on the plan.
  2. Check every opening against the exact product information.
  3. Reconcile each cabinet reference with the schedule.
  4. Resolve the installer’s outstanding questions.
  5. Keep written confirmation of the final drawing revision and order.

See our galley kitchen and cabinet schedule or use the quotation comparison guide.

Discuss your room ↗